EasyTicket ticket vending machine
EasyTicket ticket vending machine with credit card payment
The kiosk machine is designed to work with the EasyTicket dynamic capacity management sales system.
The vending machine allows customers to buy a ticket for a specific facility in a self-service way. They can pay for the ticket by credit card.
The vending machine is able to redeem barcode tickets previously purchased in the webshop for RFID wristbands, which can be used to enter the facility immediately via the access system’s turnstile.
The ticket can be in the format of a wristband, a bank card-sized thick paper, or traditional thermal paper.
The ID on the ticket allows the guest to enter the facility independently via a turnstile installed at the entrance.
The ticket supports two types of identification: a barcode printed by the kiosk machine or an RFID chip embedded in the ticket.
The kiosk is a fixed installation, its base must be drilled to the floor.
It requires an IT network endpoint with access to the EasyTicket system.
Can be installed outdoors under a rain screen roof.
EasyTicket ticket vending machine
Main features
Vandal-proof monitor
- 19″ screen size, active matrix TFT LCD display technology with LED backlight
- Resolution: 1280×1024 px
- Viewing angle 170° horizontal, 160° vertical
- 1000nit brightness
- 6mm thick vandal resistant front glass
- Capacitive touch screen with 10-point touch
- Built-in cooling control
- Built-in dimming
High brightness monitors generate more heat, so it is important to ensure the correct temperature inside the kiosk for outdoor applications. The monitor has a temperature sensor and an automatic cooling function. Control parameters – on/off temperatures, fan speed, etc. – can be set individually.
Thanks to the built-in light sensor, the monitor will always operate at the most optimal brightness. In bright sunlight, the backlight brightness is higher, while in darker ambient light, the backlight brightness is lower.
The 6mm thick glass ballast provides full protection against fist strikes.
Purchase or redeem tickets
- Buying a ticket
- Redeeming a barcode ticket purchased on the web for an RFID chip ticket
After reading the previously purchased ticket, it prints the ticket information
Up to 12 tickets can be sold in one transaction
- Wristband or credit card shaped tickets with integrated RFID chip
- Tickets preprinted with white or 4-colour graphics
- Custom text for printing
- The ticket issued will also include the credit card transaction details
- Printing a unique barcode
- Embedded RFID chip validation for access control
Sold, validated and printed tickets are available through the dispenser slot.
You can choose from 12 languages to use your device:
- Hungarian, English, German, French, Chinese, Romanian, Slovak, Spanish, Italian, Russian, Ukrainian, Polish.
Payment by credit card
- High-resolution bank card terminal with colour display
- Accepting chip, magnetic and contactless “paypass” cards, including mobile phone payments
- Stainless steel buttons for entering the PIN code
- Secure card reading and fast operation
- Communication authenticated to current security standards
- Card lock, emergency release
- Vandalism Commissioner
The vending machine operator must enter into a contract with OTP to start the automated debit card acceptance.
Once a contract is signed, the operator receives a registration code and a special sub-account.
Once you have the registration code, you can activate the card terminal.
Once activated, you can pay by credit card using the built-in terminal. In case of a successful payment, the amount withdrawn from the card will be credited to the operator’s sub-account.
The credit card terminal maintains a permanent connection with OTP bank. It requires a reliable internet connection available 0-24 hours.
Built-in readers
- 2D barcode scanner
- 35cm reading distance
- reading printed barcodes
- read from phone screen too
- RFID reader
- 5cm reading distance
- reading RFID chips embedded in tickets
With the help of the reader, you can perform the following operations:
- scan barcode voucher
- scan tickets already issued
- season ticket extension
Operation and remote monitoring
- Service interface for cashier, maintenance and admin tasks
- Measurement of internal temperature, humidity, current consumption
- Monitoring of installed batteries
- Remote shutdown and restart
- Sending measurement data and status data to Zabbix monitoring
The operation of the automatic system is greatly facilitated by the integrated remote monitoring unit.
The status of the vending machine can be monitored by continuously checking the internal status and sending it to Zabbix. Alarm events can be set.
The remote control unit can be used to disconnect the main internal units of the vending machine, allowing remote remote testing.
The remote control unit controls the operation of the built-in fans depending on the internal temperature and humidity.
Power supply protection and battery
- Surge protector
- Circuit breaker
- Heat Release
- Built-in gel batteries
- All power supplies have short-circuit protected outputs
The built-in protections greatly increase the reliability, operational safety and lifetime of the device.
Ticket formats
Screenshots
Buy a ticket
Redeem Voucher
Technical data
| Features | Adat | |
|---|---|---|
| Mechanical and environmental characteristics | ||
| Physical size | 1707x505x364 mm | |
| Weight | ~80kg | |
| Protection | IP34 | |
| Operating temperature range | 0°C - 40 °C | |
| Operating humidity | 5% - 95% | |
| Electrical characteristics | ||
| Power supply | AC 230V 50Hz | |
| Power consumption | 300W | |
| Insulation class | Class I. | |
| Electrical connection | The ticket machine must be connected to the facility's electrical distribution cabinet using an MT3x1.5mm2 cable. It is PROHIBITED to connect it to a wall socket! | |
| IT features | ||
| Monitor | 19" 4:3 active matrix TFT LCD with LED backlight, 1280x1024px resolution, ~1000nit brightness, 14msec response time, PCAP 10-point touchscreen, 6mm thick vandal-proof glass, | |
| Operating system | Windows 11 | |
| Communication interface | Ethernet 100BaseT port | |
Installation information
Installation of ticket vending machines
Installation space requirements
A floor area of 1.5 m x 1.5 m is required, taking into account the requirements for use and service. The rear of the vending machine can be installed 15cm from the wall. Access from the rear is not required.
The automat must be fixed to the floor through a 12mm hole. Drilling template can be found in the Downloads section.
Outdoor placement
The vending machine should preferably be installed in indoor room, although it has IP34 protection, outdoor use is not recommended. If it is not possible to operate it indoors, it must be placed under a rain shield which must extend at least 1 m beyond the vending machine from the front and back and from the sides. In addition to the rain shelter, the machine must be protected from direct sunlight, in particular direct sunlight on the screen must be avoided.
Power supply
The device requires a 230V AC 50Hz supply voltage. The power supply must be connected to the mains with a MT3x1,5mm2 cable with a direct line connection.
DO NOT plug the appliance into a wall socket!
Due to the Class I classification, it is important that the electrical network has an appropriate protective earthing!
IT environment
The automatic system requires internet access and access to the EasyTicket system. A diagram of the required IT operating environment can be found in the Downloads section.
Legal information
The EasyTicket ticket vending machine is subject to registration according to the relevant provisions, and a registration number must be requested from the NAV.
The registration number must be clearly displayed on the machine.
The notification form and instructions for filling it in are available at this link: form AVTOMATA.
Please note that changes in operation must also be reported!
List of legislation applicable to vending machines:
- Act CL of 2017 on the Rules of Taxation (Art.)
- Act CLI of 2017 on Tax Administration (Air.)
- Government Decree 65/2017 (XII. 28.) on the detailed rules of tax administration procedure (Adóig. vhr.)
- Act CCXXII of 2015 on the General Rules of Electronic Administration and Trust Services (e-Administration Act)
- Decree No 8/2019 (VI. 27.) (PM Decree) on the tax liability of the operator of automatic equipment
- NGM Decree No 31/2016 (IX. 2.) on the technical requirements for vending machines selling foodstuffs without operator, on the operation and servicing of vending machines and on the provision of data recorded in vending machines to the State Tax and Customs Authority (NGM Decree)
Videos
Installation information
Installation of ticket vending machines
Installation space requirements
A floor area of 1.5 m x 1.5 m is required, taking into account the requirements for use and service. The rear of the vending machine can be installed 15cm from the wall. Access from the rear is not required.
The automat must be fixed to the floor through a 12mm hole. Drilling template can be found in the Downloads section.
Outdoor placement
The vending machine should preferably be installed in indoor room, although it has IP34 protection, outdoor use is not recommended. If it is not possible to operate it indoors, it must be placed under a rain shield which must extend at least 1 m beyond the vending machine from the front and back and from the sides. In addition to the rain shelter, the machine must be protected from direct sunlight, in particular direct sunlight on the screen must be avoided.
Power supply
The device requires a 230V AC 50Hz supply voltage. The power supply must be connected to the mains with a MT3x1,5mm2 cable with a direct line connection.
DO NOT plug the appliance into a wall socket!
Due to the Class I classification, it is important that the electrical network has an appropriate protective earthing!
IT environment
The automatic system requires internet access and access to the EasyTicket system. A diagram of the required IT operating environment can be found in the Downloads section.